Crushers - Other

USED SPIDER CAP OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED SPIDER CAP OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp
 
BEST REGARDS, TAKATOSHI HAMADA

USED CYLINDER ASS'Y OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED CYLINDER ASS'Y OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED "KAWASAKI" MODEL KU-1350 (1350MM X 480MM) ULTRA COARSE GYRATORY CRUSHER S/NO. KG10119

Location: Japan

WE CAN SUPPLY
USED "KAWASAKI" MODEL KU-1350 (1350MM X 480MM) ULTRA COARSE GYRATORY CRUSHER S/NO. KG10119 WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR (WITHOUT MOTOR)

FEED SIZE: 480MM X 340MM X 240MM.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

USED "KAWASAKI" MODEL KMC-1610R SUPER SANDER S/NO. HC10380

Location: Japan

WE CAN SUPPLY
USED "KAWASAKI" MODEL KMC-1610R SUPER SANDER S/NO. HC10380 WITHOUT MOTOR.
*THIS SUPER SANDER IS SUITABLE FOR PRODUCING THE SAND.

FEED SIZE          CRUSHING CAPACITY
5 TO  0MM                   130T/H
20 TO 0MM                  100T/H
40 TO 0MM                  70T/H
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS, TAKATOSHI HAMADA

USED TOP SHELL FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER

Location: Japan

WE CAN SUPPLY
USED TOP SHELL FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI  HAMADA

USED TOP SHELL WITH CONCAVE RING FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER

Location: Japan

WE CAN SUPPLY
USED TOP SHELL WITH CONCAVE RING FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI  HAMADA

RECONDITIONED AND REPAINTED "KAWASAKI" IMPACT CRUSEHR MODEL SAP-4/150 ROTOR

Location: Japan

WE CAN SUPPLY
RECONDITIONED AND REPAINTED "KAWASAKI" IMPACT CRUSEHR MODEL SAP-4/150 ROTOR

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252

BEST REGARDS, TAKATOSHI HAMADA

USED "KOBE" ALLIS-CHALMERS MODEL 45AF AUTOFINE CRUSHER S/NO. 11-1340 WITH HYDRAULIC OIL TANK UNIT, ACCUMMULATOR & AUTOMATIC CONTROL PANEL.

Location: Japan

WE CAN SUPPLY
USED "KOBE" ALLIS-CHALMERS MODEL 45AF AUTOFINE CRUSHER S/NO. 11-1340 WITH HYDRAULIC OIL TANK UNIT, ACCUMMULATOR & AUTOMATIC CONTROL PANEL.
*THIS AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE.

 

*MORE PHOTOS & DETAILS ON REQUEST
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED "KOBELCO" MODEL KMC200 MOBILE CRUSHER WITH 30" X 18" JAW CRUSHER S/NO. DA100222, PLATE FEEDER & MAGNETIC SEPARATOR, ETC.

Location: Japan

WE CAN SUPPLY
USED "KOBELCO" MODEL KMC200 MOBILE CRUSHER WITH 30" X 18" JAW CRUSHER S/NO. DA100222, PLATE FEEDER &

MAGNETIC SEPARATOR, ETC.
*SPECIFICATION
TOTAL WEIGHT: 24,000KGS
LENGTH: 7,860MM
WIDTH: 2,800MM
HEIGHT: 2,900MM (WHEN TRANSPORTATION)
HEIGHT: 3,330MM (WHEN WORKING)
TRAVELLING SPEED: 3.5KM/HOUR
GRADEABILITY: 70% ( 35)
ENGINE: "MITSUBISHI" DIESEL ENGINE MODEL 6D34-TE1 (140PS/2,150RPM).
JAW CRUSHER SIZE: 30" X 18" (HYDRAULIC OPERATION)
CRUSHING CAPACITY: 35T/H TO 80T/H.
CLOSED SIDE SETTING: 30MM TO 95MM
PLATE FEEDER: HYDRAULIC OPERATION
FEED HOPPER SIZE: 2,400MM X 2,400MM
BELT CONVEYOR: 900MM X 4,500MM
MAGNETIC SEPARATOR AND GENERATOR, ETC.
*MORE PHOTOS & DETAILS ON REQUEST
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp
 
BEST REGARDS, TAKATOSHI HAMADA

USED "UBE-NORDBERG" MODEL 48GD GYRADISC CRUSHER S/NO. U-48004 WITH HYDRAULIC OIL TANK AND CONTROL PANEL

Location: Japan

WE CAN SUPPLY
USED "UBE-NORDBERG" MODEL 48GD GYRADISC CRUSHER S/NO. U-48004 WITH HYDRAULIC OIL TANK AND CONTROL PANEL
(WITHOUT MOTOR).
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
 

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
BEST REGARDS, TAKATOSHI HAMADA

USED "UBE-NORDBERG" MODEL 66GD GYRADISC CRUSHER S/NO. U-24613 WITH HYDRAULIC OIL TANK AND CONTROL PANEL

Location: Japan

WE CAN SUPPLY
USED "UBE-NORDBERG" MODEL 66GD GYRADISC CRUSHER S/NO. U-24613 WITH HYDRAULIC OIL TANK AND CONTROL PANEL
(WITHOUT MOTOR).*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED "UBE-NORDBERG" MODEL 84GD GYRADISC CRUSHER WITH HYDRAULIC OIL TANK AND CONTROL PANEL

Location: Japan

WE CAN SUPPLY
USED "UBE-NORDBERG" MODEL 84GD GYRADISC CRUSHER WITH HYDRAULIC OIL TANK AND CONTROL PANEL (WITHOUT MOTOR).
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp
 
BEST REGARDS, TAKATOSHI HAMADA

USED "KOBELCO" 9-36 (36" X 9") DH GYRATORY CRUSHER S/NO. 11-3598 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.

Location:

WE CAN SUPPLY
USED "KOBELCO" 9-36 (36" X 9") DH GYRATORY CRUSHER S/NO. 11-3598 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.

(WITHOUT MOTOR)
 
*THIS 9-36 (36" X 9") DH GYRATORY CRUSHER CAN MODIFY AS 36" X 11" OR 36" X 13" ONLY NEED TO CHANGE THE CONCAVE

RING.
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED CONCAVE RING OF KOBE ALLIS-CHALMERS 10-51 HYDRO CONE CRUSHER *CODE NO. 10-51-A

Location: Japan

WE CAN SUPPLY
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 10-51 HYDRO CONE CRUSHER
*CODE NO. 10-51-A


WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

USED CONCAVE RING OF KOBE ALLIS-CHALMERS 9-45 HYDRO CONE CRUSHER *CODE NO. 9-45-A

Location: Japan

WE CAN SUPPLY
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 9-45 HYDRO CONE CRUSHER
*CODE NO. 9-45-A
 

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 6-51 HYDRO CONE CRUSHER *CODE NO. 6-51-A

Location: Japan

WE CAN SUPPLY
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 6-51 HYDRO CONE CRUSHER
*CODE NO. 6-51-A
 

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER *CODE NO. 3-45-A

Location: Japan

WE CAN SUPPLY
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER
*CODE NO. 3-45-A
 

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

USED CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER *CODE NO. 3-45-B

Location: Japan

WE CAN SUPPLY
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER
*CODE NO. 3-45-B
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER *CODE NO. 4-36-A

Location: Japan

WE CAN SUPPLY
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER
*CODE NO. 4-36-A
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER *CODE NO. 4-36-B

Location: Japan

WE CAN SUPPLY
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER
*CODE NO. 4-36-B
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

USED "KOBELCO" 10-45 (45" X 10") DH GYRATORY CRUSHER S/NO. 11-3413 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR

Location: Japan

WE CAN SUPPLY 
USED "KOBELCO" 10-45 (45" X 10") DH GYRATORY CRUSHER S/NO. 11-3413 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
(WITHOUT MOTOR)
THIS GYRATORY CRUSHER CAN MODIFY AS 45" X 12", 45" X 14" AND 45" X 16" ONLY NEED TO CHANGE THE CONCAVE RING.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217   FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp/

WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

 

BRAND NEW "OTSUKA" CC-1300, CEC-1300 AND CF-1300 HOPPER LINER & TOP CELL LINER & PART NO. 1201 RIB LINER

Location: Japan

WE CAN SUPPLY
BRAND NEW "OTSUKA" CC-1300, CEC-1300 AND CF-1300 HOPPER LINER & TOP CELL LINER & PART NO. 1201 
RIB LINER


WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252

BEST REGARDS, TAKATOSHI HAMADA

USED "KOBELCO" MODEL 36AF AUTOFINE CRUSHER S/NO. 11-1798 WITH HYDRAULIC OIL TANK & OTHER ACCESSORIES

Location: Japan

WE CAN SUPPLY
USED "KOBELCO" MODEL 36AF AUTOFINE CRUSHER S/NO. 11-1798 WITH HYDRAULIC OIL TANK & OTHER ACCESSORIES
(WITHOUT MOTOR). 
*THE AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE AND MINUS 5MM
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/

 

BEST REGARDS, TAKATOSHI HAMADA


 

USED "UBE-SYMONS" MODEL 84GD GYRADISC CRUSHER WITH HYDRAULIC OIL TANK AND OTHER ACCESSORIES

Location: Japan

WE CAN SUPPLY
USED "UBE-SYMONS" MODEL 84GD GYRADISC CRUSHER WITH HYDRAULIC OIL TANK AND OTHER ACCESSORIES (WITHOUT MOTOR).
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE AND SAND. 
 
MAXIMUM FEED SIZE: 100MM X 140MM X 200MM
CRUSHING CAPACITY: 267T/H TO 373T/H.

WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
 
BEST REGARDS TAKATOSHI HAMADA

CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (A) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (A) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
DATE OF PHOTOS: JANUARY 28, 2012.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS TAKATOSHI HAMADA

CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (B) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (B) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
DATE OF PHOTOS: JANUARY 28, 2012.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED SPIDER BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED SPIDER BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012.
  
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED BOTTOM SHELL BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location:

WE CAN SUPPLY
USED BOTTOM SHELL BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED MAIN SHAFT ASS'Y WITH MANTLE CORE, MANTLE & HEAD CENTER OF KOBE ALLIS-CHALMERS 42-65 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED MAIN SHAFT ASS'Y WITH MANTLE CORE, MANTLE & HEAD CENTER OF KOBE ALLIS-CHALMERS 42-65 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012.
 
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED ECCENTRIC, ECCENTRIC BUSH, ECCENTRIC BUSH KEY, BEVEL GEAR, BEVEL GEAR KEY, ECCENTRIC WEARING PLATE & ECCENTRIC SUPPORT PLATE OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED ECCENTRIC, ECCENTRIC BUSH, ECCENTRIC BUSH KEY, BEVEL GEAR, BEVEL GEAR KEY, ECCENTRIC WEARING PLATE & ECCENTRIC SUPPORT PLATE OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED PINION SHAFT HOUSING, PINION HOUSING STUD, PINION HOUSING STUD NUT, PINION HOUSING STUD LOCK NUT,PINION SHAFT HOUSING OIL LEVEL PEA PLUG & ETC., OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER

Location: Japan

WE CAN SUPPLY
USED PINION SHAFT HOUSING, PINION HOUSING STUD, PINION HOUSING STUD NUT, PINION HOUSING STUD LOCK NUT,
PINION SHAFT HOUSING OIL LEVEL PEA PLUG, PINION SHAFT HOUSING OIL LEVEL PEA COCK & V-SHEAVE (DRIVEN)
OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER.
DATE OF PHOTOS: JANUARY 28, 2012.
 
WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/
 
BEST REGARDS, TAKATOSHI HAMADA

USED "MITSUBISHI" MODEL MRC40J MOBILE CRUSHER S/NO. OM4-00005 WITH 40" X 22" JAW CRUSHER & MAGNETIC SEPARATOR, ETC.

Location: Japan

WE CAN SUPPLY
USED "MITSUBISHI" MODEL MRC40J MOBILE CRUSHER S/NO. OM4-00005 WITH 40" X 22" JAW CRUSHER & MAGNETIC SEPARATOR, ETC.
OPERATION HOUR: 3965 HOURS.
CRUSHING CAPACITY: 65 TO 150T/H. (MADE IN 1998).


WINTECH CO., LTD.
9-21, 3-CHOME, MINAMIHORIE, NISHI-KU, OSAKA, JAPAN
TEL: 81-6-6538-1217  FAX: 81-6-6538-1252
E-MAIL: wintech@cronos.ocn.ne.jp
WEBSITE: http://www.wintech-osaka.jp/

BEST REGARDS, TAKATOSHI HAMADA

Log Out ?

Are you sure you want to log out?

Press No if you want to continue work. Press Yes to logout current user.